ProductsConnection Fittings
Connection Fittings
Click on the product name to view product catalog page, type and material specifications,submittal instructions or installation instructions.
- Model #201
Steel Coupling
DescriptionSteel couplings for joining steel, galvanized, PVC and other pipe with standard steel dimensions 1/2" - 24". Available for cast iron and other pipe in sizes 14" and larger.
- Model #202
Long Steel Coupling
DescriptionProvides longer length for longer space between pipe ends. Especially good for repairing PVC pipe. Sizes 2" - 12". Larger sizes on request.
- Model #203
Stl Transition Coupling
DescriptionFor connection of oversize to standard size pipe within the same nominal pipe size. Special ranges available.
- Model #204
Stl Reducing Coupling
DescriptionFor connection of any combination of two sizes or types of pipe either to increase or decrease sizes.
- Model #210
Ductile Iron Cplg
DescriptionThe standard wide range coupling for joining Cast Iron, Ductile Iron, A/C, C-900/C-905 PVC and other types of pipe. Sizes 2" - 24".
- Model #211
DI Cplg - PVC Stl Pipe
DescriptionSized for steel and IPS PVC this ductile iron coupling offers more deflection capability and corrosion resistance than steel couplings. Sizes 2"- 24".
- Model #212
DI Cplg - Transition
DescriptionUtilizes special transition gaskets in standard ductile iron couplings to join pipe of the same nominal size but different outside diameters. Sizes 2-1/4" - 12".
- Model #214
DI Cplg - End Cap
DescriptionProvides a simple means of capping all types of plain end pipe. Also used for line testing, air release and reducing line for service extensions. Sizes 3" - 12". Larger sizes on request.
- Model #215
Long DI Coupling
DescriptionExtra long coupling provides a wide range, accommodates wide gaps between pipe ends, reduces inventory and fits both cast iron and A/C Class 150 pipe in the popular 4", 6" and 8" sizes. Utilizes the JCM original transition gasket system.
- Model #219
DI Cplg - Restrained
DescriptionSimplifies piping installations requiring couplings and tie rods or other types of restraint. Provides an easy joint makeup with restraint in a minimum amount of space. Sizes 3" - 12".
- Model #220
Compression Cplg
DescriptionFor use in joining small diameter pipe (1/2" - 2") steel pipe sizes. Not for use on gas service.
- Model #225
Insulating Adapter Gasket
DescriptionFor adapting iron pipe size fittings to copper tube size. Also for insulation between dissimilar metals to prevent galvanic corrosion.
- Model #230
Stainless Steel Stiffener 6"
DescriptionPipe stiffeners are designed to support the interior wall of the HDPE for critical pipe joining applicatons. Recommended for all pipe end connections using mechanical bolt-on fittings. Stiffeners support the pipe-s end and controls the necking down reaction to pressure applied during normal product installation.
- Model #231
Stainless Steel Stiffener 12"
DescriptionPipe stiffeners are designed to support the interior wall of the HDPE for critical pipe joining applicatons. Recommended for all pipe end connections using mechanical bolt-on fittings. Stiffeners support the pipe-s end and controls the necking down reaction to pressure applied during normal product installation.
- Model #241
DI Optimum Rg - Std Length
DescriptionOptimum range coupling accommodates all types of pipe within the same nominal size. No change of gasket, end rings or bolts. Can be installed without complete disassembly. Sizes 3" - 16"
- Model #242
DI Optimum Rg - Long Length
DescriptionOptimum range coupling accommodates all types of pipe within the same nominal size. No change of gasket, end rings or bolts. Can be installed without complete disassembly. Sizes 3" - 16"
- Model #301
Restrained Cast Flanged Adapter
DescriptionThis most popular and versatile FCA provides a quick means of joining plain end pipe for flanged fittings, valves and equipment. Short laying length does not require exact alignment of pipe and preparation. Restrained set screws provide restraint to prevent pipe pull out.
- Model #301
Cast Flanged Adapter
DescriptionThis most popular and versatile FCA provides a quick means of joining plain end pipe for flanged fittings, valves and equipment. Short laying length does not require exact alignment of pipe and preparation. Can be used with butterfly and wafer valves. Sizes 4" - 12".
- Model #303
Fabricated Flg Adpt
DescriptionQuick means of joining plain end pipe to flanged fittings of same nominal size. Most popular sizes - 14" and larger. Also available in sizes 2" - 12".
- Model #304
Fab Flg Adpt - Reducing
DescriptionProvides a quick means of increasing or reducing pipe sizes at a flanged connection. Sizes 2" and larger.
- Model #306
Fabricated Flg Adpt
DescriptionA very versatile FCA which combines the ductile iron coupling system to a flanged outlet. Excellent for cutting in equipment or where more take up capability is needed. Available for 10" and 12" Asbestos Cement pipe. Sizes 3" - 12".
- Model #307
Fab Flg Adpt - Reducing
DescriptionSimilar to the JCM 306 FCA this adapter is available with reducing or larger flanges. Excellent for installing reduced sizes of meters and equipment in lines. For pipe sizes 3" - 12" with larger or smaller flanges.
- Model #309
Dismantling Joint
DescriptionSimplify installations and replacement of flanged fittings in retrofitting applications. Provides the solution for adding, repairing or replacing flanged fittings within a flanged pipe system. Adjustable, slip joint design accommodates either wide gaps or close quarter installations and eliminates the need for precise measurements between flange connections. Available in sizes 2" and larger, for ductile iron or flanged steel pipe systems.
- Model #610
Sur-Grip Restrainer
DescriptionAnchors IPS PVC, C-900 PVC Pipe and Ductile Iron Pipe to mechanical joint and other type fittings provided with anchor lugs. 14" - 30" for use with C-905 PVC Pipe
- Model #611
Sur-Grip Restrainer - Bell
Description14" - 30" for use with C-905 PVC Fittings and Pipe. Anchors Long Bell PVC Gasketed Fittings to C-905 PVC Pipe. JCM 611 PVC Fitting Restrainers are Priced on Application. For price and availability, provide the O.D., manufacturer and SDR of the PVC fitting.
- Model #620
Sur-Grip Restrainer
DescriptionAnchors IPS PVC, C-900 PVC Pipe and Ductile Iron Pipe over the bell, flexible couplings and other low profile joints.
- Model #621
Sur-Grip Restrainer
Description14" - 30" for use with C-905 PVC Pipe. Anchors over the bell-spigot connection, the JCM 621 prevents joint separation on pressure pipe.
- Model #630
Asbestos Cement Fitting Restrainer
DescriptionJCM 630 Restrainers have been developed to fill the need to anchor fittings, hydrants, valves and meters to 4" - 16" Asbestos Cement pipe. The wide supportive stance around the pipe combined with the split design make these restrainers ideal for retrofitting installations. Hydrants, dead end, ground subsidence and unstable soils often require restraint other than concrete thrust blocking.
- Model #631
Asbestos Cement Coupling Restrainer
DescriptionA simple and economical solution to restrain Asbestos Cement pipe into the coupling.